Information

Certification Manage
r
Jan-Erik Storgaard
This certificate may only be reproduced in its entirety and without
any change, schedule included
Date of issue [2009-01-12]
Certification Body
UL International Demko A/S, Lyskaer 8, P.O. Box 514, DK-2730
Herlev, Denmark, Tel. [phone], [e-mail]
www.ul-europe.com
00-IC-F0056 – Issue 1.0
[1] EC-TYPE EXAMINATION CERTIFICATE
[2] Equipment or Protective System intended for use
in Potentially Explosive Atmospheres
Directive 94/9/EC
[3] EC-Type Examination Certificate Number: DEMKO 08 ATEX 0803999
[4]
Equipment or Protective System: Headlight, Model MSHD3AA
[5]
Manufacturer: Eveready Battery Co.
[6]
Address: 533 Maryville University Drive, PO Box 411460, St. Louis, MO 63141 USA
[7] This equipment or protective system and any acceptable variation thereto are specified in the schedule to this certificate and the
documents therein referred to.
[8] UL International Demko A/S, notified body number 0539 in accordance with Article 9 of the Council Directive 94/9/EC of 23 March 1994,
certifies that this equipment or protective system has been found to comply with the Essential Health and Safety Requirements relating
to design and construction of equipment and protective systems intended for use in potentially explosive atmospheres given in Annex II
to the Directive.
The examination and test results are recorded in confidential report no
. 08NK03999
[9]
Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0:2006 EN 60079-11:2007 EN 60079-26:2007
[10]
If the sign "X" is placed after the certificate number, it indicates that the equipment or protective system is subject to special conditions
for safe use specified in the schedule to this certificate.
[11]
This EC-Type examination certificate relates only to the design, examination and tests of the specified equipment or protective system in
accordance to the Directive 94/9/EC. Further requirements of the Directive apply to the manufacturing process and supply of this
equipment or protective system.
These are not covered by the certificate.
[12]
The marking of the equipment or protective system shall include the following:
e I M2/II 1G Ex ia I/IIC T4