User's Manual

Instructions
1. When the charger of QC3.0 is connected to the master seat and put into the device in use, the output 10W quick
charging can be performed. Place the mobile phone with wireless charging function in the center of the transmitting coil,
then the wireless charging can charge for the mobile phones. If the blue light is flashing, it indicates that metal is detected
2. Clock use method: after power on, scan display 8, display PM,AM,DATE, and then display time.Date and temperature.
1) Long press 1 key for 3 seconds to turn off the display screen, and long press 1 key again for 3 seconds to turn on the display screen
2) Setting mode :(in the display hour setting, minute setting, alarm clock setting, date setting, as follows)
Click M: enter the setting, press the ▽/△ to set, and then press the M key, hour setting, minute setting, alarm clock setting, date setting,
do not wait for 16 seconds to exit the setting.
3) When displaying time Settings: Short press △ : up hours, up minutes; Short press, down hours, down minutes;
4) When displaying alarm clock time Settings: Short press △: up hours, up minutes; Short press, down hours, down minutes;
5) When displaying the Year Month Date setting: Short according to △: up the number of years, up the month limit, up the day limit;
Short according to: down the number of years, down the month limit, down the day limit.
6) When not in the setting, short press △12/24 hour switch
7) Before entering the Settings, press the button to switch the temperature to C (Celsius) /F (Fahrenheit)
8) In did not enter the setting, long press the △ screen alarm clock indicates that the alarm clock is on, the screen does not show the alarm
clock indicates that the alarm clock is off
Attention
1. Please keep the charger away from water or other liquid.
2. If you need to lean the charger, please make sure it is power off.
3. Using environment: Working temperature: -0～45℃, Storage humidity: 45~85%RH