Installation Guide

When powered on, Neurio will play the following tones to indicate its status in

sequential order:

If Neurio is connected to the WiFi network, you should also hear a long chime one minute after the

short chime.

TONE INDICATION DESCRIPTION

Short beeps

Voltage check

One beep for each voltage wire that is connected.

For a 2-phase installation there should be two

beeps to indicate that the black and red wires are

connected.

Short chime

Neurio’s WiFi

network started

Neurio has started hosting its own WiFi network.

You can join this network to conﬁgure Neurio and

connect it to your own WiFi network.

Long beep

Voltage warning

(conditional)

Indicates that two wires are connected to the same

phase. For North American apartments, this means

that one of Neurio’s wires should be moved to a

different breaker. This tone can be ignored for all

other 2-phase installations.

Long chime

Neurio joined network

successfully

Neurio successfully joined your WiFi network.

Falling tone

Neurio failed to

join network

Neurio was unable to join your WiFi network. Neurio will

now start hosting its own WiFi network again to allow you to

re-connect to Neurio and re-enter the WiFi credentials.