User's Manual

9
Your PowerTab may take up to 5 minutes to complete the network
joining process.
2.4 Leaving a ZigBee Smart Energy network
Warning: Involvement from your service provider will be required
to recommission your PowerTab when you want to join a ZigBee
Smart Energy network again. In general, you should only leave the
network if you are moving, or if you were specifically asked to do
so by your service provider.
To remove your PowerTab from your meter’s network:
1. Turn the device off
2. Turn the device on
3. While the startup screen is shown, hold <L> and <R> buttons
for 10 seconds
4. Press <L> (“Yes”) at the network leave confirmation screen
that appears
PART 2 – PowerTab Basics