User manual

5.4.3. Network

If you choose ‘Wired’ make sure that P4350 is properly connected to an Ethernet LAN.

If you choose ‘Wireless’ make sure that a Wi-Fi network is available.

≥ Wired

You can configure the parameters manually or automatically.

Auto: the IP configuration is automatically provided by a DHCP server.

Manual: the IP configuration must be provided by user.

≥ Wi-Fi

Select an Access Point from the available networks list and press Ok to confirm.

If the Wi-Fi connection is encrypted then enter the password using the remote control. Use

‘Function’ button to change between numbers, uppercase and lowercase.

You can configure the IP parameters manually or automatically.

5.4.4. Exit

Select this option to go back to main menu.

6. FIRMWARE UPGRADE

P4350 can be upgraded to allow system improvements in the future.

Download the latest firmware version from http://www.energysistem.com.

Copy the file to a USB storage device or to the P4350 internal hard disk.

Use the file browser to select the firmware file and press ‘Ok’. Confirm that you want to upgrade and

don’t power off P4350 until the process finishes. When completed the unit will automatically reboot.

WARNING: Do not switch off the device while the firmware upgrading is taking place, in this case the

P4350 will become unusable and the official warranty will be cancelled.