User manual

4
1. MEDIA
1.1. INTERNAL HARD DISK
Follow step-by-step the points below for a successful setup. Notice that some steps may vary
depending on the operating system.
1.1.1. Drive Installation
Unplug P4350 from mains supply before starting the hard disk installation.
1. Press the lateral buttons at the same time
to slide out the hard disk tray.
2. Fit the hard disk inside the bracket in the
right position.
3. Turn the two latches to secure the hard
disk in place.
4. Connect the SATA cables and slide in
carefully the hard disk tray to the original
position. Make sure that the lateral
buttons are properly adjusted.