User manual

7.1.5. RF LOOP

You can enable or disable this option for saving energy when HD5 is in standby status. If it set

ON, the RF loop through will be enabled. This way, antenna signal will be transmitted for RF IN to

RF OUT. If you don’t need it, you can disable this option and reduce power.

7.2. CHANNEL

7.2.1. TV CHANNEL EDITOR

Press the OK button to access this menu. The menu provides options to adjust the channel and

program settings. Here you can edit your program preferences (like lock, skip, move or delete).

EDIT: Press edit (red button) to access to a menu where you can rename, move or skip a

channel. You can change the channels order too.

RENAME: To change the channel name.

MOVE: Select the preferred program then press the green button. A move symbol will appear.

Press up/down to move the program and "Move to" to select its final position. Repeat the above

steps to move more channels.

SORT: Sort your channels from four options. Alphabetical, transponder, pay-free and service ID

order are available.

SKIP: Select the program you would like to skip and press the blue button. A skip symbol is

displayed. The program is marked as a skip. Repeat the previous step to select more programs.

Now this channel will appear as a "Invisible" channel, in the invisible channels group. You can

select between groups, as it's explained after in "Group" menu.

LOCK: You can lock selected programs for restriced view. Select the preferred program then

press the green button. A lock shaped symbol is displayed. The program is now marked as