User manual

50
Remote control unit is
not workable
The battery is exhausted Change new battery
Remote control unit is not
in the right opposite of the
IR receiver or too far from it
Adjust the way of holding
remote control unit and
near from the IR receiver
The image stop suddenly
or mosaic
The signal is too weak Strengthen the signal
11. TECHNICAL SPECIFICATION
Item Especificaction Especificaction
Tuner
Input Frequency
VHF: 170 - 230 MHz
UHF: 470 - 860 MHz
RF Input Level -25 ~ -82 dBm
IF Bandwidth 7 MHz & 8 MHz
Modulation QPSK, 16QAM, 64QAM
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
MPEG2 [e-mail]
Output Format 576p, 720p, 1080i, 4:3 & 16:9
Output Port HDMI, Single SCART
Audio
Decoder Format MPEG-1 (layer 1 & 2)
Audio Output Digital audio: S/PDIF
Power
Voltage DC 12V, 1ASupply
Consumption Max. 6 W / Standby < 0,5 W
USB 2.0
connector
Plays video (DivX, Xvid, h.264, AVI, MPG, MPEG, MKV, VOB, TS)
audio (MP3, WMA) and photos (JPEG, BMP, PNG).
Recording
format
TS. Limited to MPEG-2 DVB-T broadcasting channels.