Congratulations on purchasing Unniversal™ 4100 Digital Control 8, the universal 8 in 1 remote control. With this remote control you can control almost all brands of TV sets (TV), DVD and DVR-players (DVD), DVB receivers (DVB), digital Satellite receivers (SAT) and Cable receivers, Video Recorders (VCR), Tuners (TUNER), cassette decks (TAPE), CD players (CD), Audio amplifiers and other Audio devices (AUX). Unniversal™ 4100 controls almost all the device functions which have been set.
Once set up is finished, all data (except time) will be stored in the back-up memory to avoid data loss when replacing batteries. Please keep this user manual for future reference.
1. KEY DESCRIPTION SET To start the remote control set-up or to display the status on the LCD screen. LEARN Set the learn functions. TV/VCR/DVB/CD/DVD/ To select the device which you want to TUNER/TAPE/AUX control. POWER AV Turn the device ON or OFF. Works like the TV/Video key on your original TV remote, and TV/SAT key on your original satellite remote control. MENU Functions just like the Menu or OSD (on-screen display) or Memory key on your original remote control.
successive operations via one button for your Home-Theater. DISPLAY Displays current channel information. Key to mute the sound. 0-9 The number keys operate just like the number keys on your original remote control. Works like the ENTER key on your original remote control. OK EXIT Functions just like the UP RIGHT DOWN LEFT OK and EXIT Keys on your original remote control for menu function.
2. DIRECT SET UP (BY BRAND NAME AND CODE) If you know the brand name of the device, it can be set up directly (direct search on the screen via brand name and code selection). 1. Switch on the device (e.g. TV, DVD) which you wish to control, if the device is VCR, please insert a video cassette. 2. Press and hold the SET key on the remote control. Simultaneously press a device key (i.e. TV, DVD) 3. Release the pressed keys, the brand name is displayed on the LCD screen. 4.
REMARK: 1. To return to initial status, press the EXIT key or the device key (e.g. TV, or VCR…) 2. When testing key functioning, aim the remote control at the device which you wish to control. 3. During set-up, the OK , EXIT keys are only used to set up your new remote control. These keys can not be used for normal menu functions until you exit set-up. 4. If the device has been locked, it has to be unlocked before you can carry out the set-up. 2.
cassette. 2. Press the SET key on your remote control for more than 3 seconds before releasing it. 3. Press the UP or DOWN keys to select to C O D E S E T U P in the LCD menu, and press the OK key. 4. The screen shows the D E V S E A R C H in the LCD menu, and press OK key, then press device key to select your desired operation device(e.g.TV) and then press OK key to start the Auto Search.(In this case,you have to aim the remote control directly at the device which you wish to control) 5.
3. Once the remote control has searched all the codes, it stops the search at the first code. 4. If the device has been locked, it has to be unlocked before you can carry out the set-up. 2.2 SET-UP BY ENTER CODE 1. Switch on the device (e.g. TV,DVD) which you wish to control. 2. At the back of this user manual there is a list of brand names and code numbers for your device (e.g. Lifetec 003,010,062). 3. Press the SET key on your remote control for more than 3 seconds before releasing it. 4.
(eg.010,…) listed under the same brand name in the code list. Repeat steps 3 to 7 until all basic functions operate correctly. You can press any device key again (eg. TV) to exit set-up or use UP or DOWN to select another set-up. 3. LEARNING The learning function is used to extend the pre-programmed code list. The default code list may provide all required functions, but it is still possible to add a small number of additional functions for your new remote control.
seconds to access the learn mode. 3.1 Learn a Command 1. Press the respective device key (eg.TV) of the device which you wish to carry out programming. 2. Press he SET key for more than 3 seconds, then release it, or press the Learn key for more than 3 seconds to access the learn mode. 3. Press the UP and Down key to select LEARNING in the LCD menu, then press the OK key. 4. Press the UP or DOWN key to select LEARN KEY in the LCD menu and then press OK. The SELECT KEY is displayed on the LCD screen. 5.
REMARK: 1. A programmed target key can programmed from various source keys more than once. This remote control only Saves the most recently programmed signal. 2. All usual function keys can be learnt except Show View Macro, Set, Learn All off . 3. You may not be able to program some codes formats from this remote control. 4. It is possible to learn approx. 100keys totally for 8 devices. 3.2 Deleting programmed Key If you wish to delete a programmed command, proceed as below: 1. Press the device key (e.
the LCD menu, then press OK key. 5. Press the remote control key that you want to delete, SURE DELET is displayed on the LCD Screen, press OK to confirm this query. SUCCESS is displayed on the LCD screen. 6. Repeat Step 4-5 to delete other keys. 7. Press a device key (e.g. TV) to exit the deleting operation once all the desired remote commands have been deleted. 3.
3. Press the UP or DOWN key to select LEARNING in the LCD menu, then press OK key. 4. Press the UP or DOWN key to select DELETE DEV in the LCD menu, then press OK key. 5. Select the device which you wish to delete and press OK.. 6. SURE DELET is displayed on the LCD screen, press OK key to confirm this query. SUCCESS is displayed on the LCD screen.. 7. Repeat step 5 to delete all the commands of another device key. 8. Press EXIT key to quit from the deleting operation.
1. Press the SET key for more than 3 seconds before releasing it. 2. Press the UP or DOWN key to select LEARNING in the LCD menu and then press OK. 3. Press the UP or DOWN key to select DELETE ALL in the LCD menu and then press OK. 4. SURE DELET is displayed on the LCD screen, press OK to confirm this query. SUCCESS is displayed on the LCD screen. 4. THE MACRO FUNCTION 4.1 Setting up macros Carry out successive operations for your home entertainment centre with the aid of the macro function.
1. Press SET key for more than 3 seconds before releasing it. 2. Press the UP or DOWN key to select Macro in the LCD menu and then press OK. 3. Press the UP or DOWN key to select Macro 1 or Macro 2 or Macro 3 in the LCD menu, then press OK. 4. SETUP is displayed on the LCD screen, press OK to confirm. SELECT KEY is displayed on the LCD screen. 5. You can select the device and function key for a successive operation (eg. TV+POWER+MUTE+AV,DVD+PLAY,VCR+RECOR D,etc.
function correctly. Check key functioning before setting up the macro by pressing them to see whether the device keys flash or not. 3. Please observe that certain conditions have to be fulfilled if you wish to carry out a macro. For example, a disc or video cassette has to be inserted into the DVD player or VCR respectively if you wish to play a DVD or a tape with the VCR. 4.2 Operate Macro Press and hold Macro key and 1 key (or 2,3 key) and then release them.
6. You can press any device key to exit the deleting operation, or press EXIT key to return to the last status or use the UP or DOWN key to select another set-up. 5. OTHER SET UP 5.1 Setting the Clock It is possible to set the clock of your LCD remote control, and the clock will be displayed on the screen. 1. Press the SET key for more than 3 seconds before releasing it. 2. Press the UP or DOWN key to select C O N F I G U R E in the LCD menu, and then press the OK. 3.
5.2 Volume Lock This function is very handy if you only wish to use one device to control the volume. For example, you can use your amplifier as the main volume control and can use this function to fix the AUX volume and mute key. Irrespectively of the device being used (TV,DVD,VCR,etc.) the remote control volume and mute keys control the volume and mute of your amplifier. 1. Press the SET key for more than 3 seconds before releasing it. 2.
REMARK: You can lock one device for volume and mute control at your new remote control. The locked device is automatically unlocked if you lock another device. 5.3 Device Lock Use the device lock function to fix the current device code. The device code cannot be subsequently changed via brand name and code or automatic search. You can set it to OFF to quit this function. 1. Press the SET key for more than 3 seconds before releasing it. 2.
wish to fix, such as TV (or DVD,DVB,…) 5. Press the or key to change to the ON or OFF mode. 6. Press OK key to save the setting and SUCCESS is displayed on the LCD screen. Subsequently return to the current set up status. You can press any device key to exit the set- up or press exit key to return to the last status or use the UP or DOWN key to select another set-up.
releasing it. 2. Press the UP or DOWN key to select C O N F I G U R E in the LCD menu, and then press the OK key. 3. Press the UP or DOWN key to select LIGHT in the LCD menu, and then press OK. 4. Press the or key to change to the ON or OFF mode. 6. Press OK key to save the setting and SUCCESS is displayed on the LCD screen. Subsequently return to the current set up status.
5. You can press any device key to exit set-up, or press the EXIT key to return to the last status or use the UP or DOWN key to select another set-up. 5.6 Show View Function The Unniversal™ 4100 has a SHOW VIEW function to scan all TV or CAB/SAT channels for your quick view. 1. Press the device key to select the device which you wish to operate. 2. Press and hold the Show View key about 1 second. When the LED of the device button flashes and it goes into Show View mode.
power signal is been sending. Remark: The remote control must be pointed to device that you like to control until the operation finished. 5.8 CLEAR ALL Delete all set-up data and reset the device to the factory default settings. 1. Press the SET key for more than 3 seconds before releasing it. 2. Press the UP or DOWN key to select C O N F I G U R E in the LCD menu, and then press the OK key. 3. Press the UP or DOWN key to select CLEAR ALL in the LCD menu, and then press OK.
WARRANTY PERIOD Energy Sistem warrants its products to be free from defects in materials and workmanship at the time of purchase. The warranty period is 36 months from the date of purchase for MP3/MP4 Players, Digital Cameras, Speakers, Keyboards, Mouses, Webcams, Universal Remote Control, UPS (except for U.P.S. batteries, which have a warranty period of 24 months). In the case of Surge protection, the warranty period is 60 months. WARRANTY PROCEDURE 1) Visit the Support http://support.energysistem.
3) You may also reach by phone at the warranty service number 902 294 294. Make sure to have your purchase receipt or invoice and the product's serial number at hand when you call. 4) Alternatively, you may prefer to contact the distributor from which you purchased the product, presenting them with the receipt or invoice. DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. Trademarks. All company, brand and product names are trademarks or registered trademarks of their respective companies.
