User manual

 
34
cassette.
2. Press the SET key on your remote control for more
than 3 seconds before releasing it.
3. Press the UP or DOWN keys to select to CODE
SETUP in the LCD menu, and press the OK key.
4. The screen shows the DEV SEARCH in the LCD
menu, and press OK key, then press device key to
select your desired operation device(e.g.TV) and then
press OK key to start the Auto Search.(In this case,you
have to aim the remote control directly at the device
which you wish to control)
5. Check whether the device reacts or not. As soon as
the device reacts, press any key to stop the search.
6. Check whether majority of the keys function correctly
or not. If the majority of the keys do not function correctly,
please press UP or DOWN key to select another code.
7. Once you are satisfied with the code, simply press OK
to save it. SUCESS is displayed on the LCD screen
and the set-up is exited. You can press device key
again to exit SET UP or use UP or DOWN to select
another set-up.
REMARK:
1. If you did not manage to stop the search when the device reacted,
use the UP or DOWN key to search for the code again.
2. During the automatic search ,the OK, EXIT
keys are only used to set up your new remote control. These keys
can not be used for normal menu functions until you exit set-up.