User manual

35
ENGLISH
6.1. IMAGES VISUALIZATION
Once selected the playback source (USB reader or card reader) access to the menu
PICTURES and press the ENTER on the remote control. All the pictures content stored at
the external device will be displayed.
To play a file move across the directory (using the navigation buttons) and select the
desired file by pressing ENTER.
During the images visualization the following features are available:
≥ DISPLAY: provides detailed information about the current image (source, images
number, repeat mode).
≥ PROGRAM: sets the trancision mode during images visualization. The available
effects are: sweep up, sweep down, sweep left, sweep right, unfold top right,
unfold top left, unfold bottom right, unfold bottom left, vertical, horizontal, appear
V, appear H, center to edge, random, disable.
≥ REPEAT: select the repetition mode. There are 4 different repetition modes:
REP 1: repeat the current file.
REP DIR: repeat all the files stored on the folder.
REP ALL: repeat all the files stored on the external device.
OFF: disable the repetition mode.
≥ ZOOM: to make zoom in/out during images visualization. There are 4 zoom in and 4
zoom out levels available.
NOTE: During images visualization the audio files stored at the same folder and
source (USB reader or card reader) will be played at the same time.
7. SISTEM SETTINGS
To access to the settings menu of your Car Media Player press the button SETUP on
your remote control. To exit press ‘SETUP’ again.
The following options are available:
7.1. SETTINGS
≥
TV SYSTEM: select the coding system and broadcast television (PAL or NTSC)
when the device is connected to a TV through the A/V cable.
≥ SCREEN SAVER: enable or disable the screensaver.
≥ TV TYPE: select the aspect ratio 4:3PS, 4:3LB, 16:9.
≥ FACTORY RESTORE: adjust the device to the factory values.