User manual

26
Soft: internal setting for soft view effect.
Dynamic: user adjust brightness, contrast, colour, etc.
6.3. RATING
≥
Parental Control
Selecting a Rating allows the user to set the parental control feature of the player Select Parental
Control, and press ENTER to change the different mode.
Note: Unlock the password before setting Parental Control.
≥ Set Password
Use the 0-9 keys to input four digits(password), then press ENTER to confirm.
Note: If you forget your password, please use the universal password 6666 to unlock.
6.4. MISC SETUP
≥
Use Default Settings
Reset setup data to factory defaults.
7. DVB-T
To access DVB-T function, press SOURCE button from the remote control to choose DVB-T mode.
7.1. FIRST TIME INSTALLATION
If you are using the receiver for the first time, a First Time Installation menu will be displayed to
guide you through the initial setup. Use the remote control to finish the setup.
≥ OSD Language: Select the language for the user interface.
≥ Area: Select the country of residence.
≥ Time Zone: Adjust the time zone parameters. Select the appropriate time zone to display the local
time correctly.
≥ FTA Default Setting: If you want to reset your regional settings and clear all the stored channels,
select FTA Default Setting and confirm to reset it.
Once the Setup parameters have been properly configured, press ENTER to start the automatic
channel search. Please wait until the scanning is completed. In case you want to stop the scanning
process, press EXIT button. The channels already found will be stored.
When finished, all the active channels found will be stored automatically. The last found channel
will be showed.