User manual

ENGLISH

7.2. DVB-T MAIN MENU

To access the DVB-T Main Menu, press the SETUP or MENU buttons from the remote control.

The DVB-T main setup menu appears in the screen. Use direction buttons to navigate through the

DVB-T Menu options. The selected choice will be highlighted.

7.2.1. Auto Search:

Choose the automatic search options. The operation of the Auto Search is the same as the

explained in First Time Installation. For more details refer it.

7.2.2. Manual Search:

If any channel is missing after auto search, or you want to add recently launched channels, you

can use Manual Search to scan the desired channels. To manually search the target channel, you

must specify its parameters (Frequency and Bandwidth). Select ENTER button to start the manual

search. After the channel is found, it is saved and appended to the current channel list. If no signal

is found, a message indicating “no signal” will appear.

7.2.3. System Setup

This menu will allow you to adjust the setup options:

≥ OSD Language: Use it to change the language for the user interface.

≥ Area: Choose the country of residence.

≥ Time Zone: Adjust the time zone parameters. Select the appropriate time zone to display the local

time correctly.

≥ FTA Default Setting: If you want to reset your regional settings and clear all the stored channels,

select FTA Default Setting and confirm to reset it.

7.3. FAVORITE FUNCTION

In DVB-T mode, press ENTER button. The system will show the channels list. Then select from the

list the channel you want to make favorite and press RANDOM/ADD button to add the channel to

the favorite channels list. If you want to remove the channel from the favorite channels list, press

PROG/DEL button. You can find the favorite channels list by pressing REPEAT/FAV button.