User's Manual

. 15 .
www.energysistem.com
Voice Recording
1. After turning on the power by pressing PLAY/STOP
button, press the REC button and hold on for more
than 2 seconds to enter into recording status. (See
illustration.)
2. Press the PLAY/STOP button to listen to the re-
corded files. If there are no recorded files, Track
Number will be shown as .
3. Press REC button again to start recording, whose
interface as follows.
4. You could stop recording by pressing PLAY/STOP
button momentarily and press the PLAY/STOP but-
ton momentarily again to listen to the recorded
contents.
You could exit from Voice Recording mode and switch
to MP3 function by pressing PLAY/STOP button and
hold a while.