Manual de usuario User manual Manuel de l’utilisateur Manual do usuario HEADPHONES ENERGY MP3 h3 Series
User Manual
1. INTRODUTCION Thank you for purchasing this Energy MP3 Headphones h3 of Energy Sistem. We hope you will enjoy it. With these headphones you will listen to your WMA files without connecting any device, thanks to its microSD/SDHC card reader. Cordless and with rechargeable lithium battery. Let your music be free! We recommend you to read the following user manual in order to take the most advantage from your product, on a safely way and with the best performance. 2.
3. GENERAL PRESENTATION 1. USB port battery charger. 6. On/off switch. 2. "Line-in" port. 7. LED: mode indication lights. 3. Backwards/ Volume-. 8. Micro SD/SDHC cards port. 4. Play/pause/Mode. 5. Forwards/Volume+.
4. MAIN FEATURES ≥ Cordless headphones with MP3/WMA player. ≥ Supported files: MP3/WMA. ≥ Plays MP3 files from microSD/SDHC cards with capacity up to 32 GB. ≥ Frequency response: 20 Hz ~ 20 KHz. ≥ Supported sampling rate: 8 ~ 44 KHz. ≥ Signal/noise ratio: >70 dB. ≥ Sensibility: 100 +/-3 dB a 1KHz. ≥ Diameter size: 40 mm. ≥ Card reader with USB-OTG funtion. ≥ Rechargeable lithium battery. ≥ Charging time: 2-3 hours. ≥ USB Battery charging: 5 V. ≥ Interface: USB 2.0. ≥ Autonomy: up to 8 hours.
. RECHARGE THE BATTERY It is very recommendable to recharge completely the Energy Headphones h3 battery before first use. In order to recharge the battery, switch off the Energy Headphones h3 device and connect the mini USB connector of the USB cable into the battery power plug (1), then connect the other end of the USB power cable into a free USB port of your computer or other recharge device by USB. During the charging process, the red LED will blink (7).
8. MEMORY CARD READER To log in the memory card, follow the instructions in the previous section, connecting the USB cable in a free USB port of your computer. Switch on the Energy MP3 Headphones h3 with the microSD/SDHC inserted so your computer will recognize the memory card. The LED will keep on in blue colour. When the operation is finished, depending on the operative system of your computer, remember that it will require stopping the memory device before to disconnect it or switch off.
11. RADIO FM FUNCTION In order to select this option, press and hold the MODE button (4) Turing 2 seconds. Before using radio function, firstly, you will have to search the available radio channels and will save them for visualising them later. It is not necessary to repeat this search unless change of location of modification of the radio stations signal. To search radio channel, press the play/pause button (4). This will save all stations founded in the internal memory of the device.
13. WARRANTY Energy Sistem Soyntec S.A. warrants its products to be free from defects in materials and workmanship at the time of purchase. The warranty period is 36 months from the date of purchase for Speakers. 14. WARRANTY PROCEDURE 1. Visit the Support section at http://support.energysistem.com and select your product to view the FAQ (Frequently Asked Questions). The solution to your problem is very likely to have been already published there.
15. DECLARATION OF CONFORMITY Manufacturer Name: Energy Sistem Soyntec S.A. Address: Pol. Ind. Finestrat C/ Calpe Esq. C/ Alicante S/N, 03509 Finestrat (Alicante) SPAIN Tel: 902 388 388 Fax: 902 119 034 NIF: A53107488 We declare under our own exclusive responsibility the product compliance: Energy Sistem® Energy MP3 Headphones h3 which concern this declaration, with the norm(s) or other(s) formative(s) document(s).
