*None-use periods: if the unit is left unused for a long period, please take out the battery in order to avoid being corroded by the seepage. *Do not use the unit in places that are extremely hot, cold, dusty, or humid. *Avoid the unit being dropped.
FEATURES Digital MP3/WMA player Drive is unnecessary in Windows 2000/XP/ME USB portable memory disk Digital recording function with high quality voice A-B repeat function 5 EQ modes Support ID3, track name, artist and lyrics (pre-edit) display Firmware upgradeable Fashionable 7-color backlight USB2.
INTRODUCTION OF COVER 1-Cord hole 1 2-Earphone jack 3-Flywheel key 8 4 2 3 5 4-Play/Pause/Stop 6 /Power ON/ OFF 7 5-LCD 6-REC/A-B repeat 7-HOLD 9 8-Battery box 9-USB cover 34 /
INTRODUCTION OF LCD LCD Music REC Volume USB status Battery level Name of playing Music or REC, track number and time display 014/030 04:23 Play Mode 5Play modes are provided including Repeat One, Repeat All, Shuffle, Introduce and Normal.
BASIC OPERATION 1-Basic Operation 1)Power Supply It is powered by AAA battery. Open the rear cover of AAA battery case and install the AAA battery as per anode and cathode directions marked on the case. If the battery electricity is too weak, the LCD will display “Battery Shortage Power OFF”, and the MP player will turn off automatically. When the player is in Play state, the battery level might jump due to the electricity surge generated by the different power consumption in playing different songs.
BASIC OPERATION 2-Play Music Note: the device may play MP3 (MPEG 1 3rd layer, MPEG2 3rd Layer and MPEG2.5 3rd layer) and WMA. 1) Play In Stop or Pause state, press “ / ” key to start to play the current song. The LCD will display the Play icon, Repeat icon, Volume, Track number in playing, Playing time of current track, Total tracks number, Names of song and singer, and Battery electricity level. 2) Pause/Stop/Power Off / Pause: in Play state, short press “ ” key to pause.
BASIC OPERATION Short press “flywheel key” rightwards to play the next track and short press “flywheel key” leftwards to play the previous track. Long press “flywheel key” rightwards to achieve F.FWD function the LCD will display an icon “ ”, the playing time of current track will increase quickly; Long press “flywheel key” leftwards to achieve F.
BASIC OPERATION select “Play Mode” option by pressing “flywheel key”, press “flywheel key” to enter Play Mode Setup mode. Press “flywheel key” to select the Play mode: Normal, Repeat One, Repeat All, Shuffle and Introduce, and the position where the LCD displays Play mode will display accordingly the following icons: “ ”, “ ”, “ ”, “ ”. At last press “flywheel key” to confirm and return to the previous menu.
BASIC OPERATION 3)Previous REC file/Next REC file, F.FWD/F.REV 4)Volume adjustment 5)Output EQ Mode Setup 6)Play Mode 7)A-B Repeat Refer to Play Music for details. 4-Track Deletion In Music or Voice mode, short press “flywheel key” to enter menu, short press “flywheel key” to select Delete option and press “flywheel key” to confirm, and then select Music or Voice option, press “flywheel key” key to enter the deletion mode.
BASIC OPERATION 6-REC Start to record: In Stop/Pause/Play state of Music or Voice mode, long press REC key till the LCD displays the icon “ ”, and then release REC key, the player will start to record. Note: Vxxx.wav is the Voice recording file, which is saved in Voice folder. Stop Recording: in Recording state, short press “R” key to stop to record, any other key is unavailable.
BASIC OPERATION Short press “flywheel key” to enter menu, short press “flywheel key” to select Setup option and press “flywheel key” to confirm, and then select Contrast option by pressing “flywheel key” and press “flywheel key” key to enter Contrast adjusting state. The LCD / ” key or “flywheel key” key to adjust the will display an icon “ LEVEL ”, press “ contrast of screen.
BASIC OPERATION option, press “M” key once again, the LCD will display “VER”, “Total Capacity”, “Rest Capacity”, press any one key to exit. 8-HOLDIn any state, push HOLD key to the “ ” direction, the LCD displays an icon “ ”, at the time, any other key would be unavailable, and push the key to the “”direction to unlock, the icon “ ” disappears.
BASIC OPERATION edited. Note: The lyric filename should be corresponding to the filename of MP3 song, and the MP3 song and its corresponding lyric should be copied into the player at one time. And then the lyric shall be displayed synchronously in playing the MP3 song.
BASIC OPERATION 45
BASIC OPERATION 46
BASIC OPERATION 10-Connecting with a computer: 1). Installation of driving program Note: a) Windows 98 base needs installation of driving program, while Windows 2000/XP/ME do not . b) DO NOT connect the MP3 player to the computer before installation is completed. c) if you want to use win 2000, the windows2000 service pack 3.0 (in the install CD)must be installed. 1.Load the provided installation CD into the CDROM or download the driving program from the company website.
BASIC OPERATION 2.Double clicks on SETUP. EXE, pictures will be shown as follows: Then click Next>Yes>Next>Next>Finish according to the reminder. Installation is finished. 2). Connecting to a computer / Connect your MP3 player to PC via USB cable, press button or under the condition that the unit was turned on, the window will appear indicating the new hardware has been found, then the system will automatically install the drive program.
BASIC OPERATION mobile disk after being connected to a computer. Therefore the file transfer is operated in the same way as the ordinary disk. Note: a. Don't unplug the MP3 player during the process of uploading or downloading files; otherwise, it may cause dysfunction of the unit due to the damage to the software. For details, please see Trouble shooting. Note: a.
BASIC OPERATION d.Click OK on the pop-up window. See the following window. You may then unplug the MP3 player from USB port after the above steps. 4) Upgrade/Renew Software You'd better not upgrade the software unless the player works abnormally, i.e. not able to be powered on. A.Connect MP3 with computer. B.
BASIC OPERATION appear in My Computer , see picture a: C. Steps: Start>Program>SigmaTel MSCN Audio Player>SigmaTel MSCN Firmware Download, see the following picture b.
BASIC OPERATION Note: if you want to format data area of the flash while upgrading, you need to choose Format Data Area. System will pop out a window as the following picture. If you want to format Data Area, click yes . D: Click Start button and start upgrading software, see as follows: E: After upgrading, please click 52 Close button.
BASIC OPERATION 5). Format the MP3 Player A.Press / after connecting the player to the computer. B.Click mobile disk with right button of the mouse, and choose the menu, see the right picture: Format from FAT C.That the format window will pop out, see the above picture: D.Click Start in the format window. Then click OK button in the pop-out window and start formatting MP3 flash.
BASIC OPERATION E.After formatting, click OK button in the right picture. 6). Uninstall the driving program A.Disconnect the player to the computer. B.According to the following picture, click Start>Program> SigmaTel MSCN Audio Player>Uninstall, or Control Panel>Explorer Immediately the following window will pop out.
BASIC OPERATION conversation window will appear. Click OK to start cancel the driving program, with the following conversation window appear then. Click Finish when uninstall completes. Note: This driving program may prevent driving program installation of other MP3 products. Download driving program manually under device manager or refer to the technical support of our company. Steps for downloading driving program manually: A.
BASIC OPERATION Double click Player Recovery Device Class>Player Recovery Device, see as follows: Click Driver>Update Driver... the following windows will pop-up.
BASIC OPERATION Click NEXT on each continuously appearing window.
BASIC OPERATION B.After connecting the player to the computer, click My computer>Properties>Device Manager by right button on mouse under Windows 98, to check whether there is Player Recovery Device in device manager, see following picture.
BASIC OPERATION Click Driver>Update Driver... Installation is finished.
TROUBLE SHOOTING 11-Trouble Shooting 1.Why can't some MP3 be played? Standard MP3 only includes: the songs in layer 3 of MPEG 1, layer 3 of MPEG 2 and layer 3 of MPEG 2.5. Otherwise, it won't be played in the player except transformed by the corresponding software. 2.Why doesn't the memory size displayed under the operational system match the figure on the tab? The software in the MP3 player takes up a small portion of the memory, which coincides with the corresponding standards. 3.
TROUBLE SHOOTING memory, like fragment in the hard disk, which will cause the player running slowly. 5.What if the driving program of the MP3 player be damaged? This is caused by improper operation. For details, please refer to the Upgrade/Renew Software part. 6.What if the MP3 play works abnormally, i.e, shutting down? When abnormal causes occur due to improper operation, take out the battery and reload it.
SPECIFICATION Specification Flash memory: 128MB/256MB/512MB/1024MB (refer to the indicator on the packing) Max recording time: 8Hr/16 Hr/32Hr/64Hr Dimensions: 84mmx31mmx20mm Weight: 27.3g Power source: 1x DC 1.5V AAA alkaline battery Memory medium: built-in flash memory Microphone: built-in capacitor MIC Input: built-in MIC Output: double-channel earphone, above 8 ohm. Condition to use: 0-40oC Basic accessory: user's manual, USB cable, earphone, neck strap, installation CD, carrying case.
