Operating instructions

masterpage:Left
F
rame\MHC-GN880\MHC-GN880 GB\GB07TUN-E3.fm]
18
GB
model name [MHC-GN880/GN770/GX9000/GN660]
[4-252-939-12(1)] GB
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Before tuning to preset stations, be sure to preset
them (see “Presetting radio stations” on
page 16).
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE repeatedly until
“PRESET” lights up in the display.
3 Turn . > clockwise or
counterclockwise (or press >+ or
–. repeatedly on the remote) to
select the preset station you want.
Listening to non-preset radio
station
— Manual Tuning
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE repeatedly until
“MANUAL” lights up in the display.
3 Turn . > clockwise or
counterclockwise (or press >+ or
–. repeatedly on the remote) to tune
in the station you want.
Tips
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” lights up in
the display. There will be no stereo effect, but the
reception will improve.
• To record the radio programs, see “Recording on a
tape manually” (page 21) or “Timer recording radio
programs” (page 28).
• You can also press FUNCTION repeatedly on the
remote to select “TUNER”.
Listening to the radio
MHz
STEREO
TUNED PRESET
GROOVE LINK
EFFECT
j
YY
A B
FrequencyPreset number