Manualshelf

Operating instructions

ManualsBrandsENERGY SISTEM ManualsCassette Playermp3 sound system 400
11121314151617181920
17
RQT7372
The radio: manual tuning
1 Press [TUNER/BAND] to select "FM" or
"AM".
The unit comes on automatically.
Every time you press the button: FM AM
2 Press [PLAY MODE] on the remote control to
select "MANUAL".
Every time you press the button:
MANUAL PRESET
3 Press [u 2/REW] or [i 1/FF] to select the
frequency of the required station.
"ST" is displayed when a stereo FM broadcast is
being received.
4 Adjust the volume.
Auto tuning
Press and hold [u 2/REW] or [i 1/FF] for a moment
until the frequency starts changing rapidly. The unit begins
auto tuning, stopping when it ๎ƒšnds a station.
l
Auto tuning may not function when there is excessive
interference.
l
To cancel auto tuning, press [u 2/REW] or [i 1/FF]
once again.
A
If noise is excessive in FM
Press and hold [PLAY MODE] to display
"MONO".
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
To cancel, press and hold [PLAY MODE] again.
MONO is also cancelled if the frequency is changed.
Turn off "MONO" for normal listening.
B
FM allocation setting
By main unit only
This system allows you to receive FM broadcasts allocated
in 01 MHz steps.
To change the step to 0.1 MHz
1
Press and hold [TUNER/BRAND].
After a while the display ๎ƒ›ashes with the current
minimum frequency.
2
Continue to hold [TUNER/BRAND] down.
When the minimum frequency changes, release the
butoon. To cancel, repeat the above steps.