Operating instructions

23
RQT7372
A
Auto-off function
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for 10
minutes.
This function does not work if the source is tuner or AUX.
Press and hold [SLEEP, -AUTO OFF].
"AUTO OFF" is shown on the display.
To cancel
Press and hold [SLEEP, -AUTO OFF] again to clear
"AUTO OFF" from the display.
For your reference
The setting is maintained even if the unit is turned off.
"AUTO OFF" disappears from the display if either tuner or
AUX is selected as the source but continues to function
normally.
B
Turning the demo function off
If the clock has not been set, a demonstration of the
display is shown when the unit is switched to standby
mode.
This function is set to on at the time of purchase.
During standby mode
Press and hold [STOP g, -DEMO] until "NO
DEMO" is displayed.
The display changes each time the button is held down.
NO DEMO (off) DEMO ON (demo on)
To show a demonstration of the display
Press and hold [STOP g, -DEMO] until a demonstration of
the display is shown.
Note
l
You cannot turn demo function off when the unit is on.
l
DEMO function cannot be turned on when Dimmer is on.
Convenient functions
C To dim the display panel
Use this when you are going to sleep or any other time you
would prefer the panel to be dimmer.
Press [DIMMER].
The display dims and all lights are turned off except for [AC
IN] indicator.
To cancel
Press [DIMMER] again.
D To mute the volume
This feature is convenient when you have a telephone call,
etc.
Press [MUTING].
Press the button again to cancel. (“MUTING” goes out.)
Muting can also be cancelled by lowering the volume all
the way to “--dB”.
When the system is turned off, the muting operation will be
automatically cancelled.