Manualshelf

Operating instructions

ManualsBrandsENERGY SISTEM ManualsCassette Playermp3 sound system 400
19202122232425262728
24
RQT7372
Using the timers
By remote control only
Using the play/record timer
The timer has two functions. It can be set to on at a certain
time to wake you up, or it can be set to record from the
radio or from the aux source.
The play timer cannot be used in combination with the
record timer.
Preparations:
Turn the unit on and set the clock (
è
page 9).
l
For the play timer, prepare the music source you want
to listen to; tape, CD, radio or aux, and set the volume.
l
For the record timer, insert the cassette and tune to the
radio station (
è
page 10) or select the aux source (è page
26).
1 Press [CLOCK/TIMER] to select the timer
function.
Every time you press the button:
CLOCK zPLAY zREC
Original display
zPLAY
to set the play timer
zREC
to set the record timer
Setting the start and nish times
2 Within 7 seconds
Press [u 2/REW] or [i 1/FF] to select the
nishing time.
è [CLOCK/TIMER]
3 Within 7 seconds
Press [u 2/REW] or [i 1/FF] to select the
starting time.
è [CLOCK/TIMER]
The start and nish times are now set.
Turning the timer on
4 Press [zPLAY/REC].
Every time you press the button:
zPLAY
zREC
no display (off)
zPLAY
to turn the play timer on
zREC
to turn the record timer on
The indicator doesn’t appear if the start andnish
times or the clock haven’t been set.
5 Press [8] to turn the unit off.
The unit must be off for the timers to operate.
Play timer: Play will start in the set condition at the
set time with volume increasing gradually to the set
level.
Record timer: The unit comes on 30 seconds before
the set time with the volume muted.
To cancel the timer
Press [zPLAY/REC] to clear the timer indicators from the
display. The timer comes on at the set time everyday if the
timer is on.
To change the play/record times (when unit is on)
Do steps 1, 2, 3, and 5.
To change the source or volume (when unit is on)
1
Press [zPLAY/REC] to clear the timer indicator from
the display.
2
Make changes to the source or volume.
3
Do steps 4 to 5.
(Continued on next page)