User manual

17
In both cases (direct/scheduled recording), it will be created a file with the name
of the tuned channel, time and starting date of the recording. You can rename
the file by clicking the green button. To play recorded programs press LIST in the
remote control and select the file with up/down buttons, then press OK to play it.
Note: made recording does not support changing values such as subtitles,
languages, EPG, etc. You must have a USB data storage device connected. The
playback and recorded multimedia files should be supported with USB devices in
FAT/FAT32 format.
9. TROUBLESHOOTING
Problem Possible cause What to do
Standby LED not lit Mains lead unplugged Check mains lead
No signal found Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Check aerial lead
Check aerial
Check with dealer
No picture or sound Viewing incorrect SCART
output
Press the DTV/VCR button
Tuned to digital teletext
channel
Change to another channel
Mosaic blocks in picture or
picture freezes
Aerial may not be compatible Check aerial
Scrambled channel message Channel is scrambled Select an alternative channel
Forgotten channel lock code Re-install channels to cancel
channel lock