Instruction Manual

7/10 energysistem.com
4) FOLDER: the folder with the songs you are listening to will be repeated.
Press Mute (19) on the remote control to mute playback.
If you prefer to switch to another folder, press Change folder (18) on the remote control.
Important: If you are using the AUX input, you will have to control playback from the connected music player.
Bluetooth (BT)
To pair your sound tower with a Bluetooth device, press Playback mode (4) until Bluetooth mode is enabled. The
Bluetooth symbol (bt) will appear on the LED display (3).
At this point, access the Bluetooth settings on the device and search for Energy Tower Tower 5 g2 among the detected
devices. Select it to establish the connection. You will hear a sound confirming both devices are correctly paired. At this
point, the Bluetooth symbol (bt) is displayed permanently on screen.
Your Tower 5 g2 pairs with the source device automatically when turning on the sound tower once again, provided that
Bluetooth is enabled on the source device.
Press and hold Playback mode (4) for 2 seconds to disconnect the current device and pair the sound tower with a new
device. You will hear a sound when both devices disconnect and the Bluetooth symbol (bt) will flash on the LED display
(3).
True Wireless Stereo (TWS)
This technology allows you to wirelessly connect another True Wireless Stereo device within a maximum distance range
of 20 metres to increase power and create a stereo system with separate left and right channels.
To do so, switch on both devices and enable Bluetooth mode.
Press and hold Play/Pause (7) for 2 seconds on the sound tower on the left side of the room. This tower will be assigned
the left channel. Two letters, "L" and "R", will flash on the LED display (3). This means the first tower is searching for
new devices. Repeat the steps above on the second tower: press and hold Play/Pause (7) for 2 seconds. Wait a few
seconds until both towers connect to each other. You will hear a confirmation sound. At this point, the letters "L" and
"R" light up permanently.
To disable the True Wireless Stereo function, press and hold Play/Pause (7) for two seconds on any sound tower. You will
hear a confirmation sound when both units disconnect.
Removable storage units (USB sticks/MicroSD cards)
Play .mp3 and .wav files from your USB sticks or microSD cards (up to 128 GB). Plug the USB stick into the USB
playback port (12) or the microSD card into the MicroSD card slot (13). The sound tower plays the contents
automatically a few seconds after inserting the storage unit.
If you turn off your Tower 5 g2 or select another playback mode, the internal memory will save the moment where you
paused playback. This way, music playback will always resume from the last track you listened to.
Press Play/Pause (7) to play or pause a song.
Press Volume - (5) or Volume + (9) to adjust the volume level according to your preferences.
Press Back (6) or Next (8) to skip to the previous or next song.
To select the next folder, press and hold Playback mode (4).