Instruction Manual

8/10 energysistem.com
If you plug a USB stick or a microSD card, press and hold Play/Pause (7) for 2 seconds or press repeatedly Repeat mode
(20) on the remote control to select the preferred playback mode. The information below will appear on the LED display
(3):
1) ALL: all USB or card contents will be repeated. The folders and files stored on your removable storage units will be
read in chronological order.
2) ONE: the song you are listening to will be repeated.
3) RANDOM: random playback of all the contents of your removable storage unit.
4) FOLDER: the folder with the songs you are listening to will be repeated.
Press Mute (19) on the remote control to mute playback.
If you prefer to switch to another folder, press Change folder (18) on the remote control.
The root folders and files of your removable USB sticks and microSD cards will be read in chronological order and the
songs included in your folders in alphabetical order.
Here you have a diagram of the reading order:
FM radio
To enable FM radio mode, press repeatedly Playback mode (4) until the radio symbol (rd) appears on the LED display
(3).
Make sure the FM antenna cable is plugged into the FM radio antenna connector (15).
Automatic tuning
To carry out an automatic search of all radio stations, press and hold Playback mode (4) for 2 seconds. At this point,
your Tower 5 g2 starts searching for radio stations and shows the saved frequencies on screen.
Once the automatic search is complete, press and hold Back (6) or Next (8) to switch between the saved frequencies.
Choose the one you want to hear.
Manual tuning
Press and hold Play/Pause (7) for 2 seconds if you prefer to carry out a manual search and fine-tune any frequency.
When the LED display (3) starts flashing, you can fine-tune the selected frequency pressing Back (6) (tune -) or Next (8)
(tune +).