Instruction Manual

9/10 energysistem.com
Press and hold once again Play/Pause (7) for 2 seconds to confirm. The radio station will be saved and the LED display
(3) will stop flashing.
Presetting radio stations
To preset radio stations, first select the frequency you want to move. Press and hold Back (8) for 2 seconds. At this
point, the LED display (3) starts flashing and the preset numbers assigned to the radio stations appear on screen. Press
Back (6) or Next (8) until you find the preset number you prefer. Once you have selected the new preset number you
want to assign to the previously selected radio station, press and hold Next (8) for 2 seconds. The selected radio station
will be saved under the new preset number immediately.
Erasing radio stations
If you want to erase a radio station, first select its corresponding frequency. Press and hold Back (6) for 2 seconds. At
this point, the LED display (3) starts flashing. Press and hold the very same button for 2 seconds to erase the radio
station.
Important: We recommend carrying out a new automatic search if you place the Tower 5 g2 somewhere else.
Auxiliary audio input
Your Tower 5 g2 features a 3.5 mm audio-in (AUX) (14) to plug your music player using a 3.5 mm jack cable.
When using the audio-in (AUX), your Tower 5 g2 enters AUX mode automatically, thus showing it is ready to start
playing content from an external device.
Important: If you are using the AUX input, you will have to control playback from the connected music player.
USB port to charge external devices
Your Tower 5 g2 features a USB charging port (11) to connect a USB cable and charge other devices such as
smartphones, tablets or MP3 players, even if the sound tower is playing music.
Output technical specifications:
Voltage = 5 V
Current = 2 A
Equaliser
The device features a Treble (16) and bass equaliser (17) on the back to adjust the sound to your liking.
Lower treble as you turn up the tower volume to get a balanced sound. We recommend setting treble below 50% when
the volume is above 20 points.
The device also features digital EQ modes. Press repeatedly Equaliser (10) to select the preferred EQ mode while the
device is playing music. There are 5 EQ modes available:
EQ1: Flat or flat EQ.
EQ2: Bass, EQ for an extra bass boost.
EQ3: Treble, EQ for an extra treble boost.
EQ4: Mid high, EQ for a mid boost.
EQ5: Mid low, EQ for a mid cut.
Firmware update
Download the last version of the firmware here