Manualshelf

Owners manual

ManualsBrandsEnergy Suspension ManualsAutomotive3.4149G Body Mount Set
1
FRONT
Installation Instructions for Set #3-4149
17332
7-17-02 NJT
3/8-16x7”
3/8-16x5.5”
3/8-16x3”
3/8-16x5”
9/16-12x5”
Hex Bolt”
Hex Bolt
Hex Bolt”
Hex Bolt”
Hex Bolt”
Hex Bolt”
7/16-14x3”
.813x.375x.100
2.50x.562x.115
2.50x.562x.115
2.50x.562x.115
3.00x.562x.115
4025
4025
4025
4010
4143
4026
4026
4028
4030
OEM
OEM
OEM
OEM
OEM
4143
.875x.688x1.53
.875x.688x1.53
.875x.688x1.53
.875x.750x2.00
2.00x.375x.100
2.00x.375x.100
1.75x.437x.125
2.50x.625x.188
1.00x.437x.090
.813x.375x.100
.813x.375x.100
.813x.375x.100
.813x.375100
.813x.375x.100
.813x.375x.100
1.187x.594x.094
1.375x.470x.172
3/8-16
3/8-16
3/8-16
9/16-12
7/16-14
2.50x.562x.115
4025
.875x.688x1.53
4026
2.00x.375x.100
.813x.375x.100
3/8-16
Sleeve
Sleeve
Sleeve
Sleeve
Sleeve
Sleeve
Read these instructions carefully before installing mounts.
Spray all nuts to be removed with your favorite rust buster.
Tighten all bolts to factory specs.
Remove rear bumper. Remove top mounting brackets for radiator. Move radiator slightly to the
side to remove bolt for position #1. Loosen all positions. Now remove the bolts on ONE SIDE
ONLY ! When jacking the body, use a long enough 2x4 or 4x4 for maximum support. Never put
the jack directly on body panels. Remove old body mounts, now install new Energy Suspension
body mounts and associated parts using the below diagram as a guide.
When disassembling, take special note of the quantity and positions of any shims that may have
been inserted for body alignment. NOTE: When installing Position #1, be sure to remove one of
the OEM washers between the body and frame and place it under the frame as shown below.
POS #1
POS #2
POS #3
POS #4
POS #5
POS #6
1131 VIA CALLEJON, SAN CLEMENTE, CA 92673
R
Updated 13/DEC/01 BRH
2002 Energy Suspension. All rights reserved.2002 Energy Suspension. All rights reserved.
CC
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
*Dotted lines below are to define
where the frame perch resides.

Summary of content (1 pages)