Installation Manual

ManualsBrandsENERLITES ManualsElectricalENERLITES Screw Cap Floor Box Cover, 5.50" Diameter, 20A Tamper-Weather Resistant Receptacle Outlet, Data Cable Holes, Watertight Gaskets, UL Listed, 975519-C, Brass

5-1/2” Dia. Flush Round Cover Plate

with 20A Duplex Tamper & Weather

Resistant Receptacle

Model Number: 975519-C / 975519-S

WIRING DIAGRAM

Flush round cover plate with duplex tamper & weather resistant receptacle,

including a 20 amp duplex tamper & weather resistant receptacle, gasket and

cover.

DESCRIPTION

1. Turn off circuit breaker prior to installing the floor box.

2. Use Copper Wires only.

3. Do not exceed electrical rating of receptacle.

4. All wiring must be in accordance with all applicable National (NEC/CEC), state,

and local codes.

5. 12-10 AWG stranded or solid copper wire is preferred.

6. Contact professional electrician for further installation questions.

CAUTION-RISK OF ELECTRIC SHOCK

- The choice of color cover in Brass (C) or Nickel-Plated Brass(S).

- Corrosion resistant hardware ensure long life span and reliable performance.

- Easy access to power when you need it.

SPECIFICATION

Cover Material

Receptacle:

Voltage

Load Rating

Receptacle Material

FEATURE

Brass(C) or Nickel-Plated Brass (S)

125VAC, 60Hz

20 Amp

www.enerlites.com

Step 1

Remove knockouts and secure the box onto the floor.

Pull the wire through the opening of the floors and knockouts and connect

wires based on the wiring diagram.

INSTALLATION OF THE KIT

If this product fails within 2 years from the date of purchase due to a defect in

material or workmanship, we will repair or exchange it, free of charge. There are

no obligations or liabilities on the part of our company for consequential damage

arising out of or in connection with the use or performance of this product or other

indirect damages with respect to loss of property, revenue, or product, or cost of

removal installation or reinstallation.

WARRANTY

SIZES AND DIMENSIONS

Cover Plate

CAUTION:

- Connect wires only when no power is supplied.

- Attach the cover to the box using #8-32 mounting screws and tighten firmly.

Ground

(Green or

bare wire)

Neutral

(White wire)

Hot (Black wire)

Enerlites Inc 201509

1/8"(3mm)

5-1/2"(140mm)

SCREW

COVERPLATE

GASKET

SCREW

GASKET SUPPORT PLATE

RECEPTACLE

BOX

(* FB-02: Could be bought

separately to match 975519)

Summary of content (1 pages)

PAGE 1
CAUTION-RISK OF ELECTRIC SHOCK 5-1/2” Dia. Flush Round Cover Plate with 20A Duplex Tamper & Weather Resistant Receptacle WIRING DIAGRAM 1. Turn off circuit breaker prior to installing the floor box. 2. Use Copper Wires only. 3. Do not exceed electrical rating of receptacle. 4. All wiring must be in accordance with all applicable National (NEC/CEC), state, and local codes. 5. 12-10 AWG stranded or solid copper wire is preferred. 6. Contact professional electrician for further installation questions.