Installation Manual
4" Dia. Round Flip Lid Cover Plate with
20A Duplex Tamper & Weather Resistant
Receptacle
Model Number: 975502-C / 975502-S
975503-C / 975503-S
WIRING DIAGRAM
1. Turn off circuit breaker prior to installing the floor box.
2. Use Copper Wires only.
3. Do not exceed electrical rating of receptacle.
4. All wiring must be in accordance with all applicable National (NEC/CEC), state,
and local codes.
5. 12-10 AWG stranded or solid copper wire is preferred.
6. Contact professional electrician for further installation questions.
CAUTION-RISK OF ELECTRIC SHOCK
Flush round cover plate with duplex tamper & weather resistant receptacle, including
a 20 amp duplex tamper & weather resistant receptacle, gasket and cover.
DESCRIPTION
- Corrosion resistant hardware ensure long life span and reliable performance.
- Easy access to power when you need it.
FEATURE
SPECIFICATION
Cover Material
Receptacle:
Voltage
Load Rating
Receptacle Material
Brass(C) or Nickel-Plated Brass(S)
125VAC, 60Hz
20 Amp
PC
www.enerlites.com
Step 1
Remove knockouts and secure the box onto the floor.
Pull the wire through the opening of the floors and knockouts and connect
wires based on the wiring diagram.
INSTALLATION OF THE KIT
If this product fails within 2 years from the date of purchase due to a defect in
material or workmanship, we will repair or exchange it, free of charge. There are
no obligations or liabilities on the part of our company for consequential damage
arising out of or in connection with the use or performance of this product or other
indirect damages with respect to loss of property, revenue, or product, or cost of
removal installation or reinstallation.
WARRANTY
SIZES AND DIMENSIONS
Cover Plate
CAUTION:
- Connect wires only when no power is supplied.
- Attach the cover to the box using #8-32 mounting screws and tighten firmly.
FLANGE: Could be bought separately to match 975502 / 975503
Ground
(Green or
bare wire)
Neutral
(White wire)
Hot (Black wire)
Φ4
”
(Φ101.6mm) Φ4
”
(Φ101.6mm)
1/4”(6.35mm)1/4”(6.35mm)
- 975518: Use with Ф4" flush round cover for carpet applications.
- 975509: Use with Ф4" flush round cover when there is no 975518.
Ф5-1/4”(132.5mm) Ф4-1/4"(108mm)
975518 975509
975502 975503
or
or
BOX
(*FB-02:Could be bought separately
to match 975502 / 975503)
Bracket
RECEPTACLE
GASKET SUPPORT PLATE
GASKET
GASKET
SCREW
SCREW
COVERPLATE
COVERPLATE
Enerlites Inc 201509