User Guide

Testing & Code Compliance
 UL/CUL Listed device
 California Title 24
General
Specification
Commercial Grade
In-Wall Bi-Level
Occupancy/Vacancy Sensor
Model #: DWOS-JD
 Turn lights ON/OFF automatically (Occupancy Mode)
 Manual ON / automatically OFF (Vacancy Mode)
 Time delay is adjustable from 15 seconds (test mode) to 30 minutes
 Secured ground wire required
 Zero Crossing for long relay life
 Adjustable sensitivity settings
 Light level is adjustable
 Standard decorator wall plate included
Description: Replaces standard switches for control of lighting and/or fans. Contains two relays to
control two independent lighting loads or circuits. The passive infrared sensors work by detecting
the difference between heat emitted from the human body in motion and the background space. The
sensor switch can turn a load on and hold it as long as the sensor detects occupancy. After no
motion is detected for the set time delay, the load turned off automatically.
Specifications:
Voltage ……………………………………..……………………..…........................120/277Vac, 60 Hz
Incadescent ………………………………………….…………………………...............................800W
Fluorescent …………………………………………...................800VA@120VAC, 1600VA@277VAC
Motor …………………………………………………………………….…...............................….1/4 HP
Time delay ………………………………………………….…...............................…15 Sec to 30 Mins
Light level …………………………………………...……...…................................…30 Lux
– Datlight
Operation temperating …………………………………..………...............................…..32 F to 131 F
Features: