EAS01 User’s Manual
Quick Start Guide
Overview -1-
EAS01 Control Panel 10 9 1 2 3 12 11 4 6 5 7 8 1 Previous / volume down 8 Microphone 2 Bluetooth indicator 9 play / pause / mute / call answering 3 Next / volume up 10 Mode switch 4 Micro SD card port 11 Play indicator 5 Audio input 12 Charging indicator 6 Charging port 13 NFC 7 on/ off 13 -2-
Hook and suction cups included: Place it as you wish, even on wall. 3 interfaces to play with: Support Bluetooth, Micro SD card and AUX-in audio input/media. AUX in Bluetooth 2.
EAS01 Integrated tablet holder: Perfectly match with your tablets or smart phones 1 2 -4-
Function 1. Power On / Off Turn on/off the power by switch the button 7 to ON / OFF position. When turn on the power, a short welcome message (You enter the Bluetooth/ play mode) will be played. 2. Bluetooth Pairing Enable your smart phone/tablet Bluetooth, search “EAS01” device, and add this device. If paring is successful, a voice message of “Connection is ok” will be played, and the Bluetooth signal 2 will change from flashing to light on.
EAS01 8. Call Answering EAS01 has the call answering function under the Bluetooth connection mode. Press the call answering button 9 to answer the incoming call, and press it again to end the call. If you want to ignore the incoming call, long press the call answering button 9 to ignore the incoming call. Note: Call answering function is only available on the Bluetooth mode 9. Song Switch Short press through previous 3 / next 1 button to switch the songs.
Features 1. Bluetooth 2.1+ EDR wireless technology Offer up to 10 meters/ 30 feet of wireless connection, fast pairing and secured encryption. 2. Tap to link with NFC Simply tap with active NFC device to link 3. Built-in rechargeable battery Rechargeable battery with 8 hours of playtime. Battery capacity indicator with iOS device. 4. Built-in microphone Provide hands-free call answering or conference-call application. 5. Integrated tablet holder: Perfectly match with your tablets or smart phones 6.
EAS01 Specifications Audio Specifications Amplifier Power 2 x 3 watts Frequency Response 120Hz – 20kHz Maximum Sound Level 88 dBA Signal-to-Noise Ratio >60 dB Dimensions of Speaker unit Φ4cm full range General Specifications Battery Type Li-ion rechargeable (1100mAh , 3.7V) Battery Life (Approx.
Safety Instructions •WARNING! ELECTRIC SHOCK HAZARD: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO WATER. •Read and follow these instructions, heed all warnings, and keep this document for future reference. •Your product is suitable for use in semi-tropical and moderate climates only. Set up your product in a stable location so it will not fall and cause product damage or bodily harm. •Do not use your product near water, including dripping or splashing sources (e.g.
EAS01 Battery information and Disposal guidelines at product end of life •The product uses a non-serviceable, rechargeable battery, which should last the duration of a product’s warranty period under normal use. Please do NOT attempt to change the battery by yourself. If the battery has died, you should follow the disposal instructions in the documentation that accompanies your product. Also consult local laws and regulations for the proper disposal of batteries and electronic devices in your region.
EAS01 © 2015 Enermax Technology Corporation. All rights reserved. Technical changes, printing errors and mistakes excepted.