User manual

GENERAL PRODUCT LIMITED WARRANTY
EnerSys Delaware Inc. (“EnerSys”) warrants Genesis® NP and DataSafe® NPX batteries against defective materials and workmanship for a
period of one (1) full year from the date the battery was manufactured.
A. If initial physical inspection identifies flaws in material or workmanship that would impair life of the battery, as defined by this warranty,
or product performance, as defined by EnerSys’ electrical and physical specification as published at the time of shipment and these flaws
are not due to transportation damage or installation abuse;
OR
B. If on initial “Acceptance Test”, as defined in IEEE Std. 1188, “IEEE Recommended Practice for Maintenance, Testing, and
Replacement of Valve Regulated Lead Acid (VRLA) Batteries for Stationary Applications”, the properly installed battery and/or
string fails to meet the published performance ratings* per EnerSys’ latest published catalog data at the time of shipment;
In the event of either A or B above, then contact your nearest EnerSys sales representative to request instructions. You will be
instructed either a) to return the equipment to an EnerSys factory or service center location, FOB Destination-Freight Prepaid, for
examination, or b) to wait until an EnerSys representative arrives at the site to inspect the equipment.
If EnerSys determines the battery is physically or electrically unsound due to defective materials or workmanship on the part of EnerSys,
the defective battery(s) will be repaired or replaced at the option of EnerSys without charge to the purchaser (user) for replacement
materials. However, costs of replacement installation including but not limited to equipment, travel expenses of EnerSys representatives(s),
and costs of material transportation expenses shall be borne by the purchaser (user).
* Published performance ratings. Initial capacity shall be a minimum of 90 percent of the rated string capacity upon shipment per
IEEE-1188.
EXLCUSIONS AND LIMITATIONS
1. The purchaser (user) shall give freshening charges to the battery every six (6) months for Lead-Calcium after the manufacturing date and
until final installation. Refer to the installation and maintenance instructions for maximum storage intervals.
2. At least once every six (6) months, purchaser (user) must take readings and record information per EnerSys’ installation/maintenance
instructions. These records must be maintained for warranty claim purposes. If warranty records are not kept, the warranty shall be null and
void. During the full warranty period, these records are not necessary for a claim, however, the batteries shall be operated according to the
published installation/maintenance instructions and purchase (user) shall make all reasonable efforts to substantiate the claim, including
visits to the site(s) by EnerSys representatives.
3. This warranty applies only to the original United States and Canada domestic purchaser (user) and is non-transferable internationally,
except with the expressed written consent from EnerSys headquarters in Reading, PA.
4. This warranty does not cover physical damage due to the acts of nature or man which stress the battery beyond design limits and exert
undesirable influence aside from normal wear and tear.
5. EnerSys assumes no responsibility for any work accomplished or expenses incurred except with the expressed written consent from
EnerSys headquarters in Reading, PA.
6. Movement of batteries from original point of installation shall immediately void this product warranty, except with the expressed written
consent from EnerSys headquarters in Reading, PA.
7. Any storage shall be in a dry area having an average ambient temperature of 77ºF (25ºC), or less, and in accordance with EnerSys pub-
lished installation/maintenance instructions.
8. EnerSys exempts from any warranty claims any battery which has been subjected to misuse, abuse, alteration, or any battery that may
have been repaired or attempts made for repair by other than EnerSys.
9. EnerSys shall not be liable for indirect, incidental or consequential damages arising out of the sale or relating to the use of this product,
and the purchaser assumes responsibility for all personal injury and property damage resulting from the handling,
possession or use of the product. In no event shall the liability of EnerSys for any and all claims, including claims of breach of warranty or
negligence, exceed the purchase price of the product.
10. WARNING – Avoid exposure of the battery to any type of oil, solvent, detergent, petroleum-based solvent or ammonia solutions. These
materials could potentially cause permanent damage to the battery jar and cover and will void the warranty.
11. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER REMEDIES, INCLUDING BUT NOT LIMITED TO ACTIONS FOR BREACH OF
CONTRACT OR NEGLIGENCE. ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.
* Published performance ratings. Initial capacity shall be a minimum of 90 percent of the rated string capacity upon shipment per IEEE-1188.
When ordering new batteries, also remember the need to properly dispose (recycle) your old
lead-acid batteries.
Most federal and state regulations require lead-acid batteries be recycled. EnerSys’ nationwide
service organization can arrange pickup, transportation, and recycling to any one of our company
affiliated smelters. Call 1-800-972-7372 for more information.
Limited Warranty:
EnerSys
P.O. Box 14145
Reading, PA 19612-4145
USA
Tel:[phone]
[phone]
EnerSys EMEA
Brussels, Belgium
Tel:[phone]
EnerSys Asia
Guangdong, China
Tel:[phone]
Represented by:
Publication No: US-NP-AM-003 • January 2011 • Subject to revisions without prior notice. E.& O.E.
www.enersys.com
Printed in U.S.A.
© 2011 EnerSys. All rights reserved.
Trademarks and logos are the property
of EnerSys and its affiliates except ISO
which is not the property of EnerSys
NON-SPILLABLE
54153_US_NP_AM_003.qxp:NP AppManual 1/21/11 1:46 PM Page 16