Owner`s manual

SAFETY PRECAUTIONS 4
• ALLOW THE STOVE TO COOL BEFORE
CARRYING OUT ANY MAINTENANCE OR
CLEANING. ASHES MUST BE DISPOSED IN A
METAL CONTAINER WITH A TIGHT LID AND
PLACED ON A NON COMBUSTIBLE SURFACE
WELL AWAY FROM THE HOME STRUCTURE.
• THIS APPLIANCE IS DESIGNED AND TESTED
SPECIFICALLY FOR USE ONLY WITH FOUR
DIFFERENT TYPES OF PELLETS: STANDARD
WOOD PELLETS, 100% BARK PELLETS,
SAWDUST/HAY MIX PELLETS, AND SWITCH
GRASS PELLETS. ANY OTHER TYPE OF FUEL
BURNED IN THIS HEATER WILL VOID THE
WARRANTY AND SAFETY LISTING.
• THIS STOVE MUST BE CONNECTED TO A
STANDARD 120 V., 60 HZ GROUNDED
ELECTRICAL OUTLET. DO NOT USE AN
ADAPTER PLUG OR SEVER THE GROUNDING
PLUG. DO NOT ROUTE THE ELECTRICAL
CORD UNDERNEATH, IN FRONT OF, OR
OVER THE STOVE.
• THE STOVE MUST BE BOLTED TO THE
FLOOR, HAVE OUTSIDE AIR, AND NOT BE
INSTALLED IN A BEDROOM (PER H.U.D.
REQUIREMENTS). CHECK WITH LOCAL
BUILDING OFFICIALS.
• THE EXHAUST SYSTEM SHOULD BE
CHECKED, AT A MINIMUM, AT LEAST TWICE
A YEAR FOR ANY BUILD UP OF SOOT OR
CREOSOTE.
• THE INFORMATION GIVEN ON THE
CERTIFICATION LABEL AFFIXED TO THE
APPLIANCE ALWAYS OVERRIDES THE
INFORMATION PUBLISHED, IN ANY OTHER
MEDIA (OWNER’S MANUAL, CATALOGUES,
FLYERS, MAGAZINES AND/OR WEB SITES).
• IT IS MANDATORY TO CONNECT THIS
STOVE TO A 4¨ FRESH AIR INLET TO AVOID
THE RISK OF HOPPER BURN BACK CAUSED
BY NEGATIVE PRESSURE.
• STOVE BUILDER INTERNATIONAL INC.
GRANTS NO WARRANTY, IMPLIED OR STATED,
FOR THE INSTALLATION OR MAINTENANCE OF
YOUR STOVE, AND ASSUMES NO
RESPONSIBILITY OF ANY CONSEQUENTIAL
DAMAGE(S).
REGISTER YOUR WARRANTY ONLINE
To receive full warranty coverage, you will need
to show evidence of the date you purchased
your stove. Keep your sales invoice. We also
recommend that you register your warranty
online at:
www.enerzone-intl.com/warranty-
registration.aspx
Registering your warranty online will help us track
rapidly the information we need on your stove.