Owner`s manual

APPENDIX C

LCD INTERFACE MOUNTING

Step 1

The LCD mounting bracket is located in the hopper of the appliance and is preassembled to be installed in a

right hand side configuration when facing the unit. If you are using the right hand side configuration go to the

following step. You also have the option of installing the LCD mounting bracket on the left hand side on the

back of the unit. To reverse the assembly to a left side configuration, extend the rail with the LCD support (E)

in order to access the two screws (A) which secures the rail mechanism to the mounting bracket. Remove the

screws, rotate the rail 180° and reassemble the rail to the mounting bracket using the screws previously

removed.

Step 2

Remove the screws (C) located on the top edge of the back of the appliance. Secure the mounting bracket

(B) in place with the same screws.

FIGURE 36

FIGURE 35