Installation manual

4
3. THE FIREPLACE
3.1 INTRODUCTION
The ENERZONE SOLUTION 2.5ZC fireplace is an energy efficient, heat circulating, close
combustion fireplace. You will receive a lifetime of comfort and enjoyment from your
fireplace provided it is installed, maintained and operated properly.
• Please read these instructions and retain this manual for future reference.
• Before beginning the fireplace installation, consult the local authorities to obtain your
building permit and check your local building codes. Install the fireplace only as described
in these instructions and using only components from the manufacturers listed in table 2.
• The ENERZONE SOLUTION 2.5ZC is not intended for use with a gas log. Failure to
follow these instructions will void the certification and the warranty of the fireplace and
may result in an unsafe installation.
• This heating unit must serve as a supplementary heat source. An alternative heat source
should be available in the home if needed. The manufacturer cannot be responsible for
additional heating costs associated with the use of an alternative heat source. It is highly
recommended that the user buys this product from a retailer who can provide installation
and maintenance advices.
3.1.1 Parts Required
• Fireplace model ENERZONE SOLUTION 2.5ZC
• Insulated chimney made by the manufacturers listed in table 2, with the corresponding
specifications :
− Chimney lengths
− Elbows (where necessary)
− Associated components as per these installation instructions.
3.1.2 Additional Equipment (optional)
• Forced air kit
• Gravity venting system
• Outside air kit
• Spark screen