User's Manual

15
Communication instruction
 Intercom between indoor unit and outdoor unit.
 Under standby status,press “Call”of out door unit--Indoor unit will ring--
Show on screen--Press “OK” key, and show on the screen, then
can talk with each other.
 To call/monitor the outdoor unit is to press , if show the on
the screen, which means not able to intercom. Press again, it will
show on the screen, which means can intercom with the outdoor unit.
 Under intercom state, press to take photo. Will show on
screen.
 Under intercom state,press to take video. Will show on
screen.
 Under intercom state,press to unlock door. Will show on
screen.
 Press the upper wheel key of indoor unit on the right side. To adjust the
brightness of screen. Will show on screen.
 Press the middle wheel key of indoor unit on the right side. To adjust the
contrast ratio of screen.Will show on screen.
 Press the third wheel key of indoor unit on the right side. To adjust the
volume.Will show on screen.
 If turn on PIR,will automatically take photo or video(require TF card inside),
will show on screen.
 During intercom,show on indoor unit screen,the below battery icon is
for outdoor unit power,it will be red color when low power.
EXIT
↓
↑
MENU
EXIT