User's Manual

16
 the number stands for different indoor unit.The green lines stands for
intercom signal.
 When stand by, press key to monitor outside.
 PIR: when turn on the motion sensor, outdoor unit camera sense person
within 2 meters and will take 3pcs photos record (require TF card inside)
automatically.
 Anti-tamper alarm of outdoor unit. When rain cover separate from device, it
will alarm with big sound. At the same time, will take 5pcs photos record. Will
show on screen.
 Intercom between indoor units.
 If there are only 2 indoor units, press key, and can call another
indoor unit.
 If there are 3 indoor units,to call another 2 indoor units. Press
key to call the smaller ID no. between the 2 indoor units. Press
key to call the bigger ID no. between the indoor units.
Pairing Instruction
EXIT
1V1 Match code: (put outdoor unit next to the Indoor monitor)
 Select “code” in setting on indoor monitor -- press OK key-- enter into the
match code mode.
 Meanwhile, long press the “Reset” hole on outdoor unit back, until you hear
one “Beep” sound, then release.
 When indoor monitor displays “Successful”, outdoor unit have “di-di-di”
three sounds, means matching successfully.
 If matching failed in 16 seconds, indoor monitor shows “failed”, the outdoor
unit makes ”di” sound. Pleas try above steps again.
NOTE: By default, the monitor is paired well with the outdoor unit.
 automatically.
OK
↑
↓