User's Manual

17
1V2 (add the 2
nd
monitor)- Match code :
 Select “Give code ” on the 1st paired indoor monitor --press OK key--enter into
the giving code mode.
 On the new (second) indoor monitor, select “receive code” -- press OK key. It will
have “di-di-di” three sounds, and displays ”Successful” on the screen, which
means matching the 2nd monitor ok.
1V3(add the 3
rd
monitor) - Match code:
 Select “Give code ” on the 2nd paired indoor monitor –press OK key-- enter
into the giving code mode.
 On the new (third) indoor monitor, select“receive code”-- press OK key. It
will have “di-di-di” three sounds, and displays “successful” on the screen,
which means matching the 3rd monitor ok.
Add one more outdoor unit - Match code
 Select “Give code ” on any one paired indoor monitor --press OK key--
enter into giving code mode.
 On the new (second) outdoor unit: Long press the “reset” hole until you
hear “di-di,” two sounds. If match successfully, outdoor unit will have “di-
di-di” three sounds, and means adding the 2nd outdoor unit ok.
 After matching ok, please use the No. 2 outdoor unit to call all indoor
monitors for testing. if not ok, please repeat the above steps again.