User's Manual

7
Installation Guide
1.outdoor unit shall be installed at 1.4~1.7 meter above the floor, and the camera
shall avoid facing the sunlight directly.
2.Installation steps
A.Fix the rain cover on the wall with screws.
B.Put the outdoor unit into rain cover,and install the screw at the bottom.
3.Connect DC line according to the wiring diagram (the diameter of hole for wire
getting through should be 16~30mm). Red wire (positive pole) connects to point
1; black wire (negative pole) connects to point 2. If powered by AC power, connect
wire to point 1 and point 2.