User manual

Figure 5 Connecting a fixed satellite dish
<Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch>
If you want to watch programs from more than one satellite (For example from Astra and from Hot
Bird) it is advisable to use fixed dishes and a DiSEqC 1.0 switch. Have your Dealer aim the
dishes at the requested satellites and connect the LNB's with coax cables to the IN connectors of
the DiSEqC 1.0 switch . Connect the OUT connector of the DiSEqC 1.0 switch to the SAT IN
connector at the back of your receiver.
Figure 6. Connecting multiple fixed dishes using a DiSEqC 1.0 switch
<Connecting a dish on a motorized positioner to your receiver>
Another possibility for watching programs from multiple satellites is by mounting
a dish to a motorized DiSEqC 1.2 positioner.
Have your dealer mount the dish to the positioner, set the correct angle of the elevation and let
him set the center point for your positioner.
Connect the LNB with a coax cable to the LNB IN connector of the positioner, and connect the
OUT connector of the positioner to the LNB IN connector at the back of your receiver.
Figure 7. Connecting a dish on a motorized positioner to your receiver
7