. SPECIFICATIONS ■ Dimensions ※ Tolerance is omitted Unit (mm) 2
DC REFRIGERATOR MODEL SB30G OWNER’S MANUAL SAWAFUJI ELECTRIC CO., LTD.
REFRIGERATOR DIMENSION 171 476 39 134 335 380 440 30 487 35 38 27 250 189 34 30 178 302 90 182 78 34 ※The figure below is reference dimensions. 59 406 716 60 156 540 500 35 4-φ8.
INSTALLATION 1) Make sure the refrigerator in fitted horizontally. When installing in the Vehicle or Boat, make sure the refrigerator is not fitted to an unstable position. 2) Make sure to install the refrigerator where air flow is available. If the cooling unit air flow is contaminated, the cooling system will be degraded. 3) Avoid direct Sunlight, heat from a stove, or anything related to heat.
Refrigerator DC cord Connection - = Black Cord + = Red Cord =CAUTION= ＊ Never use the refrigerator to store gasoline or other inflammable vapors and liquids as these may cause explosion. ＊ Do not touch the evaporator and other metal parts of the cabinet with wet hands, as this may cause frostbite. ＊ Do not remove or modify any of the electrical parts as this may cause electric shock or damage to the refrigerator.
DIRECT WIRING FOR PERMANENT VEHICLE INSTALLATION (OPTIONAL) ① TWIST THE LEAD WIRE To further reduce the radio interference during DC operation, twist the negative and positive cables (use separate cables) together into a spiral form, between the battery and the DC outlet socket (see Fig 4) ② CONNECT PRODUCT DIRECT TO BATTERY Any switches and lead wires for other electrical equipment should not be shared with the wiring between the product and battery.
TEMPERATURE SETTING Temperature Control When using the refrigerator, please turn the dial in order to adjust the Temperature. Inside Temperature varies, depending on the outside Ambient Temperature. To adjust the Dial : OFF when outside Temp 30℃ Dial Location Approx. Temperature OFF shut OFF 1 Approx. 8 ℃ 3 Approx. -2 ℃ 5 Approx. -8 ℃ 1 COOL 2 REF. 0 3 5 4 TEMPERATURE CONTROL ※ If the Outside Temperature decreases, the inside refrigerator Temperature may be affected.
RELOCATING THE COMPRESSOR UNIT This refrigerator’s compressor unit can be located, to 3 different locations. 130 481 611 596 560 716 156 Extra Blower fan Horizontal installation a. Compressor unit located on the Left side. b. Compressor unit located on the end. c. Compressor unit located on the right side. Preparation: At this time, Use the hand gloves to avoid injury. CAUTION Do not move the DAMPER PIPE. CAUTION DAMPER PIPE 1. Remove 4 screws with a screwdriver. 2. Cut fasteners. 3.
4. Separate a cabinet and Compressor unit. 5. Bend the SUCTION PIPE straight, turn in the direction of the arrow. 6. Move the Compressor unit to the desired side of the cabinet. 7. Connect the 2 extension cords supplied. 8. Fix 4 screws by using a screwdriver. (approx. 1.
PLACING THE COMPRESSOR UNIT AWAY FROM THE REFRIGERATOR You can move the Compressor unit up to 1.5m away from the refrigerator. Approx . 1500mm Preparation: At this time, Use the hand gloves to avoid injury. CAUTION Do not move the DAMPER PIPE. CAUTION DAMPER PIPE 1. Remove 4 screws with a screwdriver. 2. Cut fasteners. 3. Remove 2 couplers. Press the stopper of the coupler to release.
4. Separate a cabinet and Compressor unit. 5. Bend the SUCTION PIPE straight, turn in the direction of the arrow. 6. Move and anchor the Compressor unit in a well ventilated, level position. 7. Connect the 2 extension cords supplied. 8. Fix 4 screws by using a screwdriver.
【AGENT in AUSTRALIA and NEW ZEALAND】 ENGEL DISTRIBUTION PTY LTD. 6 Ernest Clark Road, Canning Vale, WA 6155, Australia Te l : + 61 (8) – 9455 – 5099 Fax: + 61 (8) – 9455 – 5211 E-mail: info@engelaustralia.com.
