User's Manual

51
Backup/Restore
This page allows you to save the current device
configurations. When you save the configurations,
you can also reload the saved configurations into the
device through the Restore Saved Settings from a file
folder.Ifextremeproblemsoccur,orifyouhavesetthe
EAP1200Hincorrectly,youcanusetheFactoryDefault
button in the Revert to Factory Default Settings section
to restore all the configurations of the EAP1200H to
the original default settings. To Configure the Backup/
Restore Settings, click Firmware under the Systems
Manager tab.
Factory Settings
Backup Settings: To restore settings that have been
previouslybackedup,clickExport,selectthefile,and
click Restore.
Restore New Setting:Choosethefileyouwishrestore
for settings and click Import.
Reset to Default: Click the Reset button to restore the
EAP1200H to its factory default settings.
User Settings
Back Up Setting as Default: Click Backup to backup the
user settings you would like to use as the default settings.
Restore to User Default: Click Restore to restore user
settings to the factory standard settings.