User's Manual

Wireless MAC Filter
Wireless MAC Filter is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smart phones, etc.)
according to their MAC addresses. You can manually add a MAC address to restrict permission to access the Access Point. The
default setting is: Disable Wireless MAC Filter.
Note
: Only applicable in Access Point and WDS AP modes.
ACL (Access Control List) Mode:
Determines whether network access is granted or denied to clients whose MAC addresses appear
in the MAC address table on this page. Choices given are: Disabled, Deny MAC in the list, or Allow MAC in the list.
MAC Address:
Enter the MAC address of the wireless client.
Add:
Click
Add
to add the MAC address to the MAC Address table.
Delete:
Deletes the selected entries.