User's Manual

Management VLAN Settings
This section allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software has
been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have
to be physically located next to one another on the LAN.
Note
: Only applicable in Access Point and WDS AP modes.
Status:
If your network includes VLANs and if tagged packets need to pass through the Access Point, select
Enable
and enter
the VLAN ID. Otherwise, click
Disable
.
Save:
Click
Save
to apply the changes.
Note:
If you reconfigure the Management VLAN ID, you may lose your connection to the Access Point. Verify that the DHCP
server supports the reconfigured VLAN ID and then reconnect to the Access Point using the new IP address.