User's Manual

29
IP Network Settings
Select whether the device IP address will use the static
IPaddressspeciedintheIPAddresseldorbeobtained
automatically when the device connects to a DHCP server.
IP Address: The IP Address of this device.
IP Subnet Mask: The IP Subnet mask of this device.
Gateway: The Default Gateway of this device. Leave it
blank if you are unsure of this setting.
Primary/Secondary DNS: The primary/secondary DNS
address for this device.
Click Save
toconrmthechanges.
Spanning Tree Settings
This page allows you to modify the Spanning Tree settings.
Enabling Spanning Tree protocol will prevent network loops
in your LAN network.
Spanning Tree Status
:EnablesordisablestheSpanning
Tree function.
Hello Time
: Specify Bridge Hello Time, in seconds. This
value determines how often the device sends handshake
packets to communicate information about the topology
throughout the entire Bridged Local Area Network.
Max Age: Specify Bridge Max Age, in seconds. If another
bridge in the spanning tree does not send a hello packet for
a long period of time, it is assumed to be inactive.