User's Manual

32
This page displays the current status of the Wireless
settings of the EAP1750H.
Access Point/WDS AP mode:
Wireless Mode: Supports 802.11b/g/n mixed mode in
2.4GHzand802.11ac/a/nmixedmodein5GHz.
Channel HT Mode: The default channel bandwidth is 20/
40MHzin2.4GHz and 20/40/80MHz in 5GHz. The larger
the channel, the better the transmission quality and speed.
Extension Channel: Select Upper or Lower channel. Your
selection may affect the Auto Channel function.
Channel/Frequency: Select the channel and frequency
appropriate for your country’s regulation.
Auto: Check the option to enable the Auto-Channel feature.
RTS/CTS Threshold:
Speciesthethresholdpackagesize
for RTC/CTS. A small number causes RTS/CTS packets to be
sent more often and consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data packets into one packet. This
option reduces the number of packets, but also increases
packet sizes.
AP Detection: AP Detection can select the optimal channel
to use by scanning nearby areas for Access Points.
Current Prole:
 You can congure up to eight different
SSIDs (4 in WDS AP mode). If multiple client devices will be
accessing the network, you can arrange the devices into
SSID groups. Click Edittoconguretheproleandcheck
whether you wish to enable extra SSIDs.
Save: Click Save
toconrmthechanges.
2.4GHz/5 GHz SSID Prole
Wireless Network