User's Manual

46
Management VLAN Settings
This page allows you to assign a VLAN tag to the packets. A
VLAN is a group of computers on a network whose software
hasbeenconguredsothattheybehaveasiftheywereon
a separate Local Area Network (LAN). Computers on VLAN
do not have to be physically located next to one another
on the LAN.
TocongureVLANtags,youmustrstIsolateandenter
a VID before enabling VLAN under Management VLAN ID.
Note: Only applicable in Access Point and WDS AP mode.
Prole Isolation
:Restrictclientsfromcommunicatingwith
different VIDs by checking the Isolation box for the SSID
you wish to select under the Wireless Settings funtion.
VLAN ID (VID):
SpeciestheVLANtagforeachprole.
Management VLAN ID: If your network includes VLANs,
you can specify a VLAN ID for packets pass through the
Access Point with a tag. Otherwise, select no VLAN tag.
Save: Click Save
toconrmthechanges.
Note:
1.IfyoureconguretheManagementVLANID,youmay
lose your connection to the EAP1750H. Verify that the
DHCPserversupports thereconguredVLANID,then
reconnect to the EAP1750H using the new IP address.
SNMP Settings
This page allows you to assign the Contact Details, Location,
Community Name, and Trap Settings for Simple Network
Management Protocol (SNMP). This is a networking