User's Manual

48
management protocol used to monitor network attached
devices. SNMP allows messages (called protocol data units) to
be sent to various parts of the network. Upon receiving these
messages, SNMP compatible devices (called agents) returns
the data stored in their Management Information Bases. To
congureSNMPSettings,clickundertheAdvanced tab on
the side bar under Management.
Status
:EnablesorDisablestheSNMPfeature.
Contact: Speciesthecontactdetailsofthedevice.
Location: Speciesthelocationofthedevice.
Port:Displaystheportnumber.
Community Name (Read Only): Species the password
for the SNMP community for read only access.
Community Name (Read/Write):
Speciesthe password
for the SNMP community with read/write access.
Trap Destination Address:
 Species the port and IP
address of the computer that will receive the SNMP traps.
Trap Destination Community Name:
Species the
password for the SNMP trap community.
SNMPv3 Status: Enables or Disables the SNMPv3 feature.
User Name:
 Species the username for the SNMPv3.
feature
Auth Protocol
: Select the Authentication Protocol type:
MDS or SHA.
Auth Key: Specify the Authentication Key for authentication.
Backup/Restore
This page allows you to save the current device
configurations. When you save the configurations,
you can also reload the saved configurations into the
device through the Restore Saved Settings from a file