Network Router User Manual

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
13
3 Client Bridge/Router & Router/ AP
This device can be configured as a Bridge or Access Point. The default IP address
of the device is 192.168.1.1 in Client Bridge/Client Router mode. The default IP
address of the device is 192.168.1.2 in AP/Router mode. This chapter will describe
the steps to switch from Bridge to Access Point and Access Point to Bridge.
Bridge/Bridge Router to Access Point
1 Enter the default IP address (192.168.1.2) of the bridge into the address bar of
the web-browser.
2 By default, a user name and password has not been configured. If you have
configured a user name and password, please enter them into the field to
continue
3 Once you have logged in, click on the Operation Mode link under the
Management menu.
4 Since this device is currently in Bridge mode, the Bridge radio button will be
selected by default.
5 Select the AP radio button to and then click on the Apply Change to switch the
operation mode to Access Point.
6 Wait for about 1 minute and the device will automatically restart into Access
Point mode.
Access Point to Bridge/Bridge Router
1 Enter the default IP address (192.168.1.1) of the bridge into the address bar of
the web-browser.
2 By default, a user name and password has not been configured. If you have
configured a user name and password, please enter them into the field to
continue
3 Once you have logged in, click on the Operation Mode link under the
Management menu.