User's Manual

6.3 Wireless

The ECB1200 supports five operating modes: Access Point, Client Bridge, WDS AP, WDS Bridge, WDS Station.

To access operation mode, click Wireless section under Network in the sidebar. You will see Wireless setting customizable

options for both 2.4GHz and 5GHz. Under Wireless Setting you will see following items:

System Properties

Device Name Enter a name for the device. The name you type appears in SNMP management. This name is

not the SSID and is not broadcast to other devices.

Band Steering Send 802.11n client to the 5GHz band, where 802.11b/g clients cannot go and leave

802.11b/g clients in 2.4GHz to operate their slower rate. Band Steering works within the

Access Point by directing 5GHz-capable clients to the band.*

Operation Mode Use the radio button to select an operating mode.

Wireless Settings 2.4GHz

Edit SSID for VLAN ID assignment, encryption setting, MAC allow, deny list and Traffic

Shapping per SSID bandwidth control.

Wireless Settings 5GHz

Edit SSID for VLAN ID assignment, encryption setting, MAC allow, deny list and Traffic

Shapping per SSID bandwidth control.

Guest Network Settings Segregate temporary guest WiFi usage with individual SSID, security and bandwidth control.

Save Click Save to confirm the changes.

Note: When enable band steerin

function, both 2.4GHz and 5GHz SSID and securit

settin

must be the same.