User's Manual

51
Advanced (WDS Brid
ge mode)
Fragment Threshold
Specifies the maximum size of the packet per fragment. This function can reduce the chance of
packet collision.
However, when the fragment threshold is set too low, there will be increased overhead resulting in
poor performance.
RTS Threshold
When the packet size is smaller than the RTS Threshold, the packet will be sent without an
RTS/CTS handshake, which may result in incorrect transmission.
N Data Rate
You can limit the transfer rates between the device and wireless clients
. Each Modulation Coding
Scheme (MCS) refers to a specific transfer speed.
Channel Bandwidth
Set whether each channel uses 20Mhz or 40Mhz transmission frequency. To achieve 11n speeds,
40Mhz channels must be used.
Preamble Type
A preamble is a message th
at helps access points synchronize with the client.
Long Preamble is standard based so increases compatibility.
Short Preamble is non-standard, resulting in decreased compatibility, but increased performance.
Tx Power
Set the power output of the wireless
signal.