Manualshelf

User's Manual

ManualsBrandsEnGenius Technologies ManualsElectronics11N Long Range Multi-Function Client Bridge / Access Point
919293949596979899100
92
9.8 Static Routing
If your wireless router is connected to a network
with different subnets, this feature will allow the
different subnets to communicate with each
other.
Note: The NAT function needs to be disabled for the
Routing feature to be enabled.
Static Routing
Enable Static Routing
Check
this box to
e
nable the Static Router feature.
Destination LAN IP
Enter the IP address of the destination LAN.
Subnet Mask
Enter the Subnet Mask of the destination LAN IP address
D
efault Gateway
Enter the IP address of the Default Gateway for this destination IP and Subnet.